|
Command Stations and Boosters
All
releases are included below.
If you are looking for something specific, not shown below,
please use
the
Google Search Link  here,
or the Google search at the bottom of all pages on our site:
If you are
unable to find an item on our site after using the Google
search,
e-mail us and let us know what item you could not locate.
|
Stock Items!
As much as possible and within the limits of demand and
responsible fiscal management we keep these in stock |
|
Item Description
Not all items can be in stock at all
times.
Due to minimum order requirements and shipping charges we
"bunch" up re-orders to save you money.
(We reserve the right to correct errors and change
prices without prior notice.) |
|
| Note:
Not all of the items below may be in stock or available but
the information is provided for reference purposes. |
Please place your order using our SECURE Shopping Cart site:
http://wig-wag-trains-cart.com/home
If you MUST send an e-mail inquiry, copy & paste the entire description TEXT ONLY (NO pictures!) from the
item you are ordering into your e-mail.
It will save time and reduce confusion in determining
what you
are inquiring about.
With the quantity of lines we carry it's not possible to memorize all of them. |
Be
sure you review our terms pages before placing your order:
First: Terms
Page One Finally: Terms Page Three
If you place an order, you have agreed to our terms. |
Please
remember to give your first and last name and the city and
state where you live in all
your e-mails.
Non-USA
customers please include the country. |
| Item Description |
|
| Part #: DTX-DB150 - DB150 is shipped as part of Super Empire Builder Sets. DB150 is also available separately |
DB150 Command Station / Booster:
Full LocoNet Capabilities. DB150 gives you the ultimate in expandability!
Up to 22 throttles in command station mode.
Use with any LocoNet throttle (DT400 series, DT300 series, DT100 series, DT200, UT2, UT1, BT2, Computer throttle, LocoPalm Throttle and new Digitrax and LocoNet Certified throttles to come soon)
Built in broadcast write only programmer. Genesis uses Paged Programming method exclusively.
Built in 5 Amp Digital Command Control Booster Rated at 80VA.
Many command station options are user customizable.
Accepts either 50/60Hz AC or DC input from your existing power supply. Minimum input voltage: 12V AC or DC, Maximum input voltage: 22V AC or 28V DC. The power supply you use should be within this range and should be overload protected for a maximum output of 4.5 amps DC.
Auto resetting over temperature & short circuit protection.
Digitrax Boosters are safe for use with all scales because they are multi scale selectable for N through G scale operations. N Scale=12V, HO Scale=15V, O/G Scale=20V.
Track Status indicator shows voltage and signal type (DCC or "Zero Stretch" Analog Signal for conventional operation.)
Stabilized Track Drive Output. Over Voltage Protected.
LocoNet Expansion Network for easy reliable system hook up and future system expansion. All connections are made with 6 conductor telco jacks & wire. The LocoNet wiring scheme gives you a very reliable system for sending your commands to the track and controlling your trains. For future expansion, LocoNet offers you full access to advanced features such as track level feedback for train detection, signaling & automated operation without the need to run a separate bus. LocoNet is more than just wiring, it is a fully integrated train control system.
Sync output configures DB150 Operating Mode & connects the DB150 to expansion boosters
High impedance balanced or unbalanced signal input receivers on the LocoNet Interface allow boosting of several different types of command control signals.
Auto shutdown if command control drive signal is lost so that the layout will not convert to DC operation if a cable or connection is broken. The trains won't just "take-off" if they are not getting the DCC signal.
Complies with FCC Part 15, Class B RFI Requirements.
DCC Compatible.
Detailed Instructions are Included.
Damaged/Defective products should be returned directly to Digitrax for repair.
|
|
|
|
Part #: DTX-DB200 OPTO - DB200+ 8 AMP BOOSTER/OPTO-ISOLATED
 Click
picture to see large view
Detailed Instructions are Included.
Damaged/Defective products should be returned directly to Digitrax for repair.
|
|
|
| Part #: DTX-DB200 Plus - DB200+ 8 AMP BOOSTER |
Click
picture to see large view |
More power to you! This 8 Amp booster is great for layouts that run lots of locos and for large-scale layouts where power requirements are heavy. This is a booster only and does not have command station capabilities. |
Detailed Instructions are Included.
Damaged/Defective products should be returned directly to Digitrax for repair. |
|
|
| Part #: DTX-DCS100 - 5 AMP COMMAND STATION/BOOSTER |
Click
picture to see large view |
The DCS100 is a combination DCC Command Station & Booster. The DCS100 operates as the command station and main system booster on a Digitrax LocoNet system. It can also be used in conjunction with your computer if you choose to do so.
The DCS100 accepts throttle input from any LocoNet throttle (DT400 series, DT300 series, DT100 series, DT200, UT2, UT1, BT2, Computer throttle, LocoPalm Throttle and new Digitrax and LocoNet Certified throttles to come soon) |
Detailed Instructions are Included.
Damaged/Defective products should be returned directly to Digitrax for repair. |
|
|
| Part #: DTX-DCS200 - 8 AMP COMMAND STATION/BOOSTER |
Click
picture to see large view |
The DCS200 is a combination DCC Command Station & Booster. The DCS200 operates as the command station and main system booster on a Digitrax LocoNet system. It can also be used in conjunction with your computer if you choose to do so.
The DCS200 accepts throttle input from any LocoNet throttle (DT400 series, DT300 series, DT100 series, DT200, UT2, UT1, BT2, Computer throttle, LocoPalm Throttle and new Digitrax and LocoNet Certified throttles to come soon) |
Detailed Instructions are Included.
Damaged/Defective products should be returned directly to Digitrax for repair. |
|
|
| Part #: DTX-DCS50 Throttle/Command Station/Booster |
Click
picture to see large view |
The DCS50 product is essentially our award-winning Zephyr product shipped without a powersupply. We typically sell DCS50's to international customers who already have their own power supplies.
- Everything you need to get started in Digitrax Command Control (with the exception of a power supply) for a great low price.
- Perfect for beginning, intermediate and advanced model railroaders. It is easy to use and has tons of features.
- DCS50 Throttle/Command Station/Booster offers excellent speed control, prototypical consisting, the full range of programming features and much more.
The DCS 50 Set Includes:
- DCS50 Throttle/Command Station/Booster All-In-One
- One LT1 LocoNet Cable & Decoder Test Kit
- Complete Manual Set (click here to download manuals): Zephyr Manual and Decoder Manual
|
Detailed Instructions are Included.
Damaged/Defective products should be returned directly to Digitrax for repair. |
|
|
Digitrax No Worries Warranty
Digitrax is giving customers a one year "No Worries" Warranty against manufacturing defects and accidental customer damage on all Digitrax products.
That's it! A simple, straightforward warranty with no tricky language!
End users deal directly with Digitrax so dealers don't get caught in the middle! When you have a problem, simply go to the warranty and repair section of the www.digitrax.com website where you can fill out a repair form and send your product to Digitrax for either warranty or non-warranty repairs. When the repair is complete, they will send it back to you at no additional charge! |
| Item Description |
|
Stock Checks:
Inventory is a fluid commodity. It changes by the
hour (sometimes by the minute). To retain our pricing structure
we maintain stock levels designed to turnover 6 times each
year. We cannot guarantee stock status till we have an order
in hand. All product is subject to prior sale. If we confirm
that we have it, and, while we are waiting for the order
it sells, you would be upset that we did not hold it.
We used to hold items but learned a VERY EXPENSIVE lesson.
When we held items for customers’ orders, the order
never materialized 80%+ of the time. We lost out on
the orders placed while the item was on hold. Also
we wasted staff time that could have been used to pull actual
orders.
Since we are well known for finding older stock the fact
that it may not be on our shelves at this minute does not
mean we can’t get it. So, as we spell out on our terms
pages, we don’t do it anymore. You may, however, call in and we will tell you if the items
are available and if possible attempt to locate what we
don’t have while you are on the phone. |
| Last Update by: GJC |
| Thursday, July 11, 2019 12:29 PM |
|
|
|
Wig-Wag, LLC
